Weike FurniturePublic Space Seating · Craftsmanship
Back to News
ProductionNovember 16, 2026

Triangle Stool Armrest Welding|Quality and Craftsmanship in Manual Welding

Waco Chair's triangle stool armrests use manual welding. This article uses 8 real process photos to show fixture positioning, CO₂ mixed-gas welding, station change and grinding and painting.

Waco Chair's Triangle Stool series is manufactured with manually welded armrests. Unlike fully automated lines, manual welding offers greater flexibility in clamping, welding technique and quality control, making it ideal for irregular bent tubes and multi-position welds. These 8 real photos walk you through how a Triangle Stool armrest is welded step by step.

1. Fixture Positioning: The First Step in Triangle Stool Armrest Welding

The armrest is made of a bent tube and connectors. Before welding, it must be fixed by a fixture to ensure accurate, symmetrical and dimensionally stable weld positions.

Photo 1|Tube mounted on fixture, red quick-clamp positioning

The bent tube is placed on the welding fixture and locked by the red quick handle to fix the weld position precisely.

Photo 1 Tube clamped on fixture

Photo 1 Tube clamped on fixture

Photo 2|Manual clamping and alignment

Wearing protective gloves, the worker uses the fixture to fine-align the tube and connector so the part sits perfectly at the weld position.

Photo 2 Manual clamping alignment

Photo 2 Manual clamping alignment

2. CO₂ Mixed-Gas Welding: The Core Welding of Triangle Stool Armrests

The armrest is welded with CO₂ mixed-gas shielded welding — fast, with a small heat-affected zone, flat and firm seams. It is the mainstream process for metal armrest welding.

Photo 3|Arc striking, blue-white weld light and spatter

The welder strikes the arc at the first weld point, producing bright blue-white arc light and flying metal spatter.

Photo 3 Arc striking

Photo 3 Arc striking

Photo 4|First weld point in progress

Arc light and sparks intertwine as the wire and base metal fuse at high temperature, forming the first weld point of the armrest.

Photo 4 First weld point

Photo 4 First weld point

Photo 5|Repositioning for multi-position welding

The advantage of manual welding is the ability to adjust the workpiece angle at any time, welding multiple positions of the armrest contour evenly.

Photo 5 Repositioning welding

Photo 5 Repositioning welding

Photo 6|Welding the second and third weld points

After adjusting the fixture, the remaining weld points are welded, with the welder controlling wire feed and travel speed by experience to ensure penetration and seam quality.

Photo 6 Multi-point welding

Photo 6 Multi-point welding

About the gas: The armrest can be welded with pure CO₂ or a CO₂ + argon mix. Mixed-gas welding costs a little more, but gives better seam formation, less spatter and more stable overall quality — ideal for premium armrest products.

3. Moving to the Next Station and Finishing

Photo 7|Moving the workpiece to the next station

After the weld points at this station are finished, the workpiece is moved to the next station for further welding or unloading.

Photo 7 Moving to next station

Photo 7 Moving to next station

Photo 8|Finished armrest removed and sent to grinding and painting

The welded Triangle Stool armrest is removed and sent to the grinding and painting process, finally gaining a smooth, neat surface.

Photo 8 Finished armrest removed

Photo 8 Finished armrest removed

4. Quality Value of Triangle Stool Armrest Welding

Weld strength: CO₂ mixed-gas welding gives sufficient penetration and firm joints; the armrest is stable under load and does not deform over long use.

Weld quality: Manual welding allows point-by-point control, with even multi-position seams and fewer defects such as cold lap and slag inclusion.

Surface finish: After welding, the armrest is ground to remove weld spatter and burrs, then painted to form a smooth anti-corrosion surface for both aesthetics and durability.

Waco Chair's Triangle Stool armrests combine the flexibility of manual welding with high-precision connection of irregular bent tubes, providing sturdy, durable seat components for airports, stations, hospitals and other public spaces. Feel free to contact us about Triangle Stool armrest welding and customization solutions.

The above process photos are extracted from the Triangle Stool armrest manual-welding real-shot video with subtitles removed to highlight the welding process itself.